DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar
Description
Our company provides DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar.All of DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar conform to Military standard, nuclear power. 100% Ultrasonic test.
- Material:Metal,DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar
- Metal Type:structural steel series.
- Square bar / Flat bar: 3mm to 800mm
Packing details:
DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar Products are well packed and clear labeled according to the regulations and customer's requests.Intact packages are able to avoid any damage which might otherwise be caused during storage or transportation.
Products Details
DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness.
| Chemical Composition (weight%): | C (％): 0.38 ~ 0.43 |
| Si (％): ≤ 0.35 |
| Mn (％): 0.70 ~ 0.90 |
| P (％)≤: 0.035 |
| S (％)≤: 0.025 |
| Cr (%): 0.55 ~ 0.75 |
| Ni (%): 1.10 ~ 1.40 |
| Mo (％): - |
Mechanical Properties Under
Final Heat Treatment:
| Tensile strength σb≥/MPa: 950 |
| Yield strength σs≥/MPa: 755 |
| Elongation δ5 ≥(%): 12.0 |
| Reduction of area ψ(％) ≥: - |
| Hardness + annealed condition: HBW 269 max. |
DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
Equivalent Grade:
DIN 40NiCr6 DIN 17200(1987)
1.5711
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar DIN 1.5711 Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Product Tags:
|
|
MTC Certification Structural Steel Flat Bar DIN 40NiCr6 1.5711 Images
|
